Part Number Hot Search : 
732E042 00145 70475 2N3703 MC68B00 7302001 PI74A RT1N151S
Product Description
Full Text Search
 

To Download AS-2R250DLF Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Semi-Precision Power Wirewound Resistor
AS Series
* 1/4 watt to 10 watts * 0.1 ohm to 175K ohms * 5%, 3%, 1%, .5% tolerance * Resistance wire TCR 20 ppm/C * RoHS-compliant version available
Alloy resistance wirewound to specific parameters including TCR's from
All welded cap and lead
AlphaDigital Marking Silicone conformal coating
Heat conducting ceramic
Electrical Data
IRC Type Similar MIL-R-26 Style Power Rating 275C Max. Hot Spot 125C 0.5 0.5 RW70U 1 1 RW79U 2 3 2 3 RW74U/ 5 7 RW78U 10 25C 1 1 2 2 3 4 3 5 7 9 14 Commercial Range (ohms) Min. 0.1 0.1 0.1 .05 0.1 0.1 0.1 0.1 0.1 0.1 0.1 Max. 1.0K 6.0K 7.5K 2K 20K 24K 18K 30K 60K 90K 175K Non-Inductive Range (ohms) Min. * * 0.1 * 0.5 0.5 0.2 0.5 0.8 1.0 3.0 Max. * * 3.8K * 10K 12K 7.5K 15K 30K 45K 50K Available Resistance (ohms) 0.5%, 1% 1-1K 1-6K 1-7.5K 1-2K 1-20K 1-24K 1-18K 1-30K 1-60K 1-90K 1-175K 3%, 5% 0.1-1K 0.1-6K 0.1-7.5K .05-2K 0.1-20K 0.1-24K 0.1-18K 0.1-30K 0.1-60K 0.1-90K 0.1-175K
AS-1/4 AS-1/2 AS-1 AS-1C AS-2 AS-2B AS-2C AS-3 AS-5 AS-7 AS-10
RW81
Inductance of AS-1/2 is less than 1H at 1MHz. To order non-inductive types, add the prefix "N". Example: NAS-1, NAS-2C, etc.
*Typical inductance of AS-1C <5 ohms is <1H. Lower values available upon request.
General Note
IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print.
Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com
A subsidiary of TT electronics plc AS Series Issue August 2008 Sheet 1 of 3
Semi-Precision Power Wirewound Resistor
Physical Data
NOTE: * Coating and marking is resistant to normal degreasing. Consult factory for special requirements.
1.50 MIN. (38.1)
B A
Please note lead length dimension change on the following two items only: AS-2B 1.3 min. AS-2C 1.3 min.
D C
IRC Type AS-1/4 AS-1/2 AS-1 AS-1C AS-2 AS-2B AS-2C AS-3 AS-5 AS-7 AS-10
A0.032 0.250 (6.4) 0.312 (7.9) 0.367 (9.3) 0.256 (6.5) 0.480 (12.2) 0.540 (13.7) 0.489 (11.0) 0.687 (17.5) 0.875 (22.2) 1.250 (31.8) 1.812 (46.0)
B (max) 0.094 (2.4) 0.094 (2.4) 0.125 (3.2) 0.115 (2.9) 0.250 (6.3) 0.219 (5.6) 0.157 (4.0) 0.282 (7.2) 0.344 (8.8) 0.344 (8.8) 0.385 (9.8)
C (max) 0.312 (7.9) 0.375 (9.5) 0.429 (10.9) 0.303 (7.7) 0.600 (15.2) 0.663 (16.6) 0.594 (15.1) 0.812 (20.6) 0.980 (24.9) 1.375 (35.0) 1.937 (49.2)
D (Lead Diameter) 0.020 (0.5) 0.020 (0.5) 0.020 (0.5) 0.025 (0.64) 0.025 (0.64) 0.032 (0.8) 0.032 (0.8) 0.032 (0.8) 0.032 (0.8) 0.040 (1.0) 0.040 (1.0) 0.040 (1.0) 0.040 (1.0)
Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com
AS Series Issue August 2008 Sheet 2 of 3
Semi-Precision Power Wirewound Resistor
Environmental Testing at 25C
Test Condition Load Life 1000 hours Moisture Resistance Temperature Cycle Short Time Overload Low Temperature Operation Solder Heat Shock Vibration Max R 1.0% 1.0% 0.5% 0.5% 0.5% 0.25% 0.5% 0.5%
Power Derating Curve
Percent of 125C Power Rating 200 175 150 125
AS- 2B
AS- 1/4, 1/2, 1, 1C
AS- 3, 2
AS- 2C AS- 5, 10
100 75 0 25 75
AS- 7
125
175
225
275
Ambient Temperature (C)
Selected Pulse-Handling Capability @ 125C
14 Energy (watts-second) 12 10 8
AS- 2B
Ordering Data
Sample Part No. IRC Type
AS
AS - 3
27R0
F
LF
AS- 2A
AS- 2
Power
AS- 3
3 = 3 watts (See specification chart for other power ratings)
Resistance Value
6
AS- 2C
(100 ohms and greater - First 3 significant digits plus 4th digit multiplier) Example: 100 ohms = 1000, 1000 ohms = 1001, 150,000 ohms = 1503 (Less than 100 ohms - "R" is used to designate decimal) Example: 51 ohms = 51R0, 1 ohm = 1R00, 0.25 ohms = R250
4
AS- 1
Tolerance
J = 5%; H = 3%; F = 1%; D = 0.5%
2 0 0.1
AS- 1/2
AS- 1/4
Lead Free Construction
0.2
0.5
1
2
5
10
Resistance (ohms)
Wire and Film Technologies Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com
AS Series Issue August 2008 Sheet 3 of 3


▲Up To Search▲   

 
Price & Availability of AS-2R250DLF

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X